ADTRAN Stub Routing Specifikace stáhnout pdf (Strana 370)

100

101

SHDSL Interface Configuration Command Set Command Reference Guide

alarm-threshold [loop-attenuation | snr-margin]

Use the alarm-threshold command to set thresholds for specific alarm conditions. Use the no form of this

command to disable threshold settings.

Syntax Description

loop-attenuation

<value>

Enter a value from 1-127 dB. If signal energy loss on the loop exceeds the

configured value, the router issues an alarm.

snr-margin

<value> Signal-to-noise ratio margin. Enter a value from 1-15 dB. If the difference in

amplitude between the baseband signal and the noise exceeds the configured

value, the router issues an alarm.

Default Values

No defaults necessary for this command.

Command Modes

(config-shdsl 1/1)# SHDSL Interface Configuration Mode required

Command History

Release 3.1 Command was introduced

Usage Examples

The following example sets the loop attenuation threshold at 45 dB:

(config)#

interface shdsl 1/1

(config-shdsl 1/1)#

alarm-threshold loop-attenuation 45

1 2 ... 365 366 367 368 369 370 371 372 373 374 375 ... 567 568

Komentáře k této Příručce

Žádné komentáře

ADTRAN Stub Routing Specifikace Strana 370

Komentáře k této Příručce

Související produkty a manuály pro Sítě ADTRAN Stub Routing