ADTRAN Stub Routing Specifikace stáhnout pdf (Strana 352)

100

101

DSX-1 Interface Configuration Command Set Command Reference Guide

line-length <value>

Use the line-length command to set the line build out (in feet or dB) for the DSX-1 interface. Use the no

form of this command to return to the default value.

Syntax Description

<value>

Configures the line build out for the DSX-1 interface

Valid options include: -7.5 dB or <0 to 655> feet

Default Values

<value>

0 feet

Command Modes

(config-t1 1/2)# DSX-1 Interface Configuration Mode required

Command History

Release 1.1 Command was introduced

Functional Notes

The

line-length

value represents the physical distance between DSX equipment (measured in cable length).

Based on this setting, the AOS device increases signal strength to compensate for the distance the signal must

travel.

Valid distance ranges are listed below:

• 0-133 feet

• 134-265 feet

• 266-399 feet

• 400-533 feet

• 534-655 feet

Usage Examples

The following example configures the DSX-1 interface

line-length

for 300 feet:

(config)#

interface t1 1/2

(config-t1 1/2)#

line-length 300

1 2 ... 347 348 349 350 351 352 353 354 355 356 357 ... 567 568

Komentáře k této Příručce

Žádné komentáře

ADTRAN Stub Routing Specifikace Strana 352

Komentáře k této Příručce

Související produkty a manuály pro Sítě ADTRAN Stub Routing