ADTRAN Stub Routing Specifikace stáhnout pdf (Strana 240)

100

101

DHCP Pool Command Set Command Reference Guide

DHCP POOL COMMAND SET

To activate the DHCP Pool command set, enter the ip dhcp-server pool command at the Global

Configuration Mode prompt. For example:

Router>

enable

Router#

configure terminal

Router(config)#

ip dhcp-server pool MyPool

Router(config-dhcp)#

The following commands are common to multiple command sets and are covered in a centralized section

of this guide. For more information, refer to the sections listed below:

do on page 558

end on page 559

exit on page 560

All other commands for this command set are described in this section in alphabetical order.

client-identifier <identifier> on page 241

client-name <name> on page 243

default-router <address> <secondary> on page 244

dns-server <address> <secondary> on page 245

domain-name <domain> on page 246

hardware-address <hardware-address> <type> on page 247

host <address> [<subnet mask> or <prefix length>] on page 249

lease <days> <hours> <minutes> on page 250

netbios-name-server <address> <secondary> on page 251

netbios-node-type <type> on page 252

network <address> [<subnet mask> or <prefix length>] on page 253

1 2 ... 235 236 237 238 239 240 241 242 243 244 245 ... 567 568

Komentáře k této Příručce

Žádné komentáře

ADTRAN Stub Routing Specifikace Strana 240

Komentáře k této Příručce

Související produkty a manuály pro Sítě ADTRAN Stub Routing