
Table 4: Channelized E1 and Channelized E1 IQ show interfaces Output Fields (continued)
Level of OutputField DescriptionField Name
detail extensiveNumber of bytes and packets received and transmitted on the physical interface.
• Input bytes—Number of bytes received on the interface.
• Output bytes—Number of bytes transmitted on the interface.
• Input packets—Number of packets received on the interface.
• Output packets—Number of packets transmitted on the interface.
Traffic statistics
extensiveInput errors on the interface. The following paragraphs explain the counters
whose meaning might not be obvious:
• Errors—Sum of the incoming frame aborts and FCS errors.
• Drops—Number of packets dropped by the input queue of the I/O Manager
ASIC. If the interface is saturated, this number increments once for every
packet that is dropped by the ASIC's RED mechanism.
• Framing errors—Number of packets received with an invalid frame checksum
(FCS).
• Giants—Number of frames received that are larger than the giant threshold.
• Runts—Number of frames received that are smaller than the runt threshold.
• Policed discards—Number of frames that the incoming packet match code
discarded because they were not recognized or not of interest. Usually, this
field reports protocols that the Junos OS does not handle.
• L3 incompletes—Number of incoming packets discarded because they failed
Layer 3 (usually IPv4) sanity checks of the header. For example, a frame with
less than 20 bytes of available IP header is discarded.
• L2 channel errors—Number of times the software did not find a valid logical
interface for an incoming frame.
• L2 mismatch timeouts—Number of malformed or short packets that caused
the incoming packet handler to discard the frame as unreadable.
• HS link CRC errors—Number of errors on the high-speed links between the
ASICs responsible for handling the router interfaces.
• Resource errors—Sum of transmit drops.
Input errors
Copyright © 2014, Juniper Networks, Inc.64
Channelized E1 Interfaces Feature Guide for Routing Devices
Komentáře k této Příručce