ADTRAN IPR-S1000 Uživatelský manuál stáhnout pdf (Strana 30)

Configuring the IPR-S1000

4) With the «+» or «-» key, select startup or load.

5) Confirm the selection by pressing the «down» arrow.

143. TFTP load

This screen allows you to load a profile stored on a TFTP server.

1) In the «1. Set config» menu, select «14. Profiles».

2) Enter that menu by pressing the «right» arrow.

3) Select «143. TFTP load», and enter that menu by pressing the

«right» arrow.

Example:

4) With the «+» or «-» key, enter the TFTP server address.

5) Confirm the selection by pressing the «down» arrow.

144. TFTP save

This screen allows you to save the current configuration to a TFTP

server.

1) In the «1. Set config» menu, select «14. Profiles».

2) Enter that menu by pressing the «right» arrow.

3) Select «144. TFTP save», and enter that menu by pressing the

«right» arrow.

Example:

Note: The current configuration will be saved on the TFTP server

under the name dotlink.cnf

4) With the «+» or «-» key, enter the TFTP server address.

5) Confirm the selection by pressing the «down» arrow.

15. Chg. write pwd

This screen allows you to enter a new password for the write level.

Factory profile:

Startup

Load

TFTP Server addr.:

192.168.001.004

TFTP Server addr.:

192.168.001.004

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 107 108

Žádné komentáře

ADTRAN IPR-S1000 Uživatelský manuál Strana 30