ADTRAN Quintum Tenor AS Uživatelský manuál stáhnout pdf (Strana 2)

Configuring a New Gateway

Instructions for initial configuration are available in Installing and Configuring Quintum Tenor DX

Gateway technical note or Installing and Configuring the Quintum Tenor AS Gateway technical note,

available online at http://kb.adtran.com.

Upgrading your Current Quintum Gateway for SSG

To enable SSG on an existing gateway, you must obtain the SSG software and a license key from

Quintum Technical Support.

Obtaining the Latest SSG Software

Ensure you have the latest SSG software loaded using the instructions below. To find Quintum's latest

firmware versions, please visit: http://www.quintum.com/support.

1. Download the firmware from the Quintum web site and unzip the file (for example, using a

program such as WinZip). Save the files to a new, empty directory on your hard drive.

2. From your PC select Start > All Programs > Accessories > Command Prompt. The Command

Prompt window is displayed.

3. Use the CD command (cd\) to change to the directory containing the unzipped firmware files on

your local hard drive.

4. Type ftp followed by the IP address of the unit. Press Enter.

5. Log in with the user name and password. The default for both is admin.

6. Enter the following commands:

bin <Enter>

hash <Enter>

prompt <Enter>

mput *.* <Enter>

get reset.sys <Enter> (In order for the upgrade to take effect, you must reset the unit.

You can reset now or wait until the next time you login).

7. To confirm the upgrade, initiate a telnet session with the unit and use the command show –v. The

system software should reflect the upgraded firmware version.

Upgrading your Current License File for SSG

If you would like to upgrade your current unit (Tenor AS, Tenor AF, or Tenor DX) to include the

Survivable SIP Gateway (SSG) functionality, you must install the applicable license file. A license file

1 2 3 4 5 6 7 ... 10 11

Žádné komentáře

ADTRAN Quintum Tenor AS Uživatelský manuál Strana 2